Panic Alarm Station User Manual
44
1. Check Enable Log Upload Server.
2. Set log server IP and server port.
3. Click … to upload the CA certificate.
4. Click Save.
System management and remote upgrade.
Click to enter the Remote Configuration page, go to System → System Maintenance.
System Maintenance
System Management
You can reboot the device, restore default settings, restore all settings, and import/export
configuration file.
Reboot
Restart the device.
Restore Default Settings
Restore the default settings, that is, except the IP address and user information, all other
parameters of the device will be restored to factory default settings.
Restore All
Restore all the parameters to factory default settings, and the device needs to be reactivated
after restoring the parameters to default.
Import Configuration File
Import the configuration file from the client software to the device.
To Next Page
Loading...
