HIKVISION E Series - Appendix 2 Waterproof

E Series IR Speed Dome Installation Manual
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
33
Appendix 2 Waterproof
Notes:
 The long-arm wall mount is recommended for the outdoor application of speed dome.
 You cannot use the short-arm wall mount or pendant mount for outdoor application, because it
is not water-proof.
 It is recommended to use the mount with inner threaded interface and good waterproof
performance.
 If you use a mount with outer threaded interface, please adopt waterproof measures to the
adapter applied between the mount and the dome.
 Do not install indoor speed dome to the outdoor environment.
L-shape Pole Mount
Make sure that the L-shape pole mount is designed with a certain inclination angle as shown in
following figure. Water won’t flow from the pole into the speed dome with the inclination angle.
θ
Figure A-5 Customized Mount
Long-arm Wall Mount
The long-arm wall mount is recommended for the outdoor application. The arm of wall mount is
designed with a certain inclination angle to prevent incoming water, as shown in Figure A-6. During
outdoor application, the long-arm wall mount can be used with the pole mount adapter or the
corner mount adapter.