Network Video Recorder User Manual
180
Managing Network HDD
Purpose:
You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD. Up to 8
network disks can be added.
Enter the HDD Information interface.
Menu > HDD>General
HDD Information Interface
Click the Add button to enter the Add NetHDD interface, as shown in Figure 12-7.
HDD Information Interface
Add the allocated NetHDD.
Select the type to NAS or IP SAN.
Configure the NAS or IP SAN settings.
Add NAS disk:
1) Enter the NetHDD IP address in the text field.
2) Click the Search button to search the available NAS disks.
3) Select the NAS disk from the list shown below.
4) Or you can just manually enter the directory in the text field of NetHDD Directory.
5) Click the OK button to add the configured NAS disk.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
