HIKVISION iDS-TCV907-BIR

The area will be zoomed in.
4.
Click any posion of the image to restore to normal image.
5.
Click to disable digital zoom.
2.1.10 Enable Regional Focus
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Click .
2.
Drag the cursor from the upper
le corner to the lower right corner to select the area that needs
to be focused.
Result
The selected area is focused.
2.1.11 Enable Regional Exposure
Enable regional exposure to expose paral area of the live view image.
Steps
1.
Go to
Conguraon → Video → Video Encoding → Regional Exposure .
2.
Check Enable.
3.
Drag the mouse to draw an area.
The drawn area will be exposed.
Figure 2-1 Enable Regional Exposure
4.
Click Save.
Network Trac Camera Operaon Manual
6