HIKVISION K1108AMK Series User Manual

Chapter 4 Acvaon
4.1 Acvate Device Locally
You are required to acvate the device rst by sengs a strong password for it before you can use
the device.
Steps
1.
Power on the device to enter the acvaon page automacally.
2.
Create a password and conrm it.
Note
You can tap to enable or disable password reveal.
3.
Tap Next to nish acvaon.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can beer protect your product.
What to do next
Aer acvang the device, the quick conguraon page will pop-up automacally. Refers to Quick
Conguraon for details.
4.2
Acvate Device via Web
You are required to acvate the device rst by seng a strong password for it before you can use
the device.
Default parameters of the door
staon are as follows:
●
Default IP Address: 192.0.0.65.
●
Default Port No.: 8000.
●
Default User Name: admin
Steps
1.
Power on the device, and connect the device to the network.
2.
Enter the IP address into the address bar of the web browser, and click Enter to enter the
acvaon page.
Video Intercom Villa Door Staon User Manual
10

HIKVISION K1108AMK Series Specifications

General

Brand	HIKVISION
Model	K1108AMK Series
Category	Intercom System
Language	English