HIKVISION K1108AMK Series User Manual

2.
Select device event or door event.
3.
Click to enable or disable Nofy Security Center for event.
Note
Send an excepon or alarm signal to the remote management soware when an event occurs.
8.6.13 Access Control Sengs
Set Authencaon Parameters
Click Conguraon → Access Control → Authencaon Sengs .
Note
The funcons vary according to dierent models. Refers to the actual device for details.
Figure 8-10 Set
Authencaon Parameters
Terminal
Terminal descripon is read-only.
Connuous Face Recognion Interval
You can set the interval between 2 connuous recognion of a same person during the
authencaon. In the congured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Note
The interval ranges from 1 s to 10 s.
Click Save to save the sengs aer the conguraon.
Set Door Parameters
Click Conguraon → Access Control → Door Parameters .
Door No.
Select the device corresponded door No.
Door Name
Video Intercom Villa Door Staon User Manual
57

HIKVISION K1108AMK Series Specifications

General

Brand	HIKVISION
Model	K1108AMK Series
Category	Intercom System
Language	English