HIKVISION K1108AMK Series User Manual

8.6 Conguraon
8.6.1 Set Local Parameters
Set the live view parameters, picture and clip sengs.
Set Live View Parameters
Click Conguraon → Local to enter the Local page. Congure the stream type, the play
performance and click Save.
Picture and Clip
Sengs
Click Conguraon → Local to enter the Local page. Select image format, saving path and click
Save.
You can also click Open to open the
le folder to view details.
8.6.2 View Device
Informaon
View the device name, device No., system type, language, model, serial No., version, number of
channels, IO input, RS-485, register number, alarm input, alarm output, and device capacity, etc.
Click
Conguraon → System → System Sengs → Basic Informaon to enter the conguraon
page.
You can view the device name, device No., system type, language, model, serial No., version,
number of channels, IO input, RS-485, register number, alarm input, alarm output, and device
capacity, etc.
8.6.3 Set Time
Set the device's me, me zone, synchronizaon mode, server address, NTP port, and interval.
Click Conguraon → System → System Sengs → Time Sengs .
Click Save to save the
sengs aer the conguraon.
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
Video Intercom Villa Door Staon User Manual
47

HIKVISION K1108AMK Series Specifications

General

Brand	HIKVISION
Model	K1108AMK Series
Category	Intercom System
Language	English