HIKVISION K1108AMK Series User Manual

4.
Enable Protocol 1.0.
5.
Click Save to enable the sengs.
Time Parameters
Go to Intercom → Call Sengs to enter the page.
Congure Max. Communicaon Time and Max. Message Duraon, and click Save.
Note
●
Max. communicaon me between the module indoor staon and client ranges from 90 s to
120 s. The call will end automacally when the actual calling duraon is longer than the
congured one.
●
Max. message
duraon ranges from 30 s to 60 s. The message will end automacally when the
actual message
duraon is longer than the congured one.
Press Buon to Call
Steps
1.
Click Intercom → Press
Buon to Call to enter the sengs page.
2.
Click Call Schedule Sengs to create a new template plan.
1) Set Schedule Name.
2) drag to set weekly schedule for indoor
staon and center.
3) Click Add, set
specic Start Time and End Time, and drag to set schedule for indoor staon
and center.
4) Click Save.
3.
Click
to congure Buon Sengs and select a call schedule.
4.
Click Save.
Number
Sengs
Link the room No. and SIP numbers.
Click Number
Sengs to enter the page.
Video Intercom Villa Door Staon User Manual
62

HIKVISION K1108AMK Series Specifications

General

Brand	HIKVISION
Model	K1108AMK Series
Category	Intercom System
Language	English