HIKVISION PanoVu Series User Manual

Server Cercate/Client Cercate
Note
The device has default self-signed server/client cercate installed. The cercate ID is default.
Create and Install Self-signed Cercate
Steps
1. Go to Conguraon → System → Security → Cercate Management .
2. Click Create Self-signed Cercate.
3. Input
cercate informaon.
Note
The input cercate ID cannot be the same as the exisng ones.
4. Click OK to save and install the cercate.
The created cercate is displayed in the Server/Client Cercate list.
If the
cercate is used by certain funcons, the funcon name is shown in the column
Funcons.
5.
Oponal: Click Cercate Property to see the cercate details.
Install Self-signed Request
Cercate
You can send the self-signed cercate to a trusted third-party for the signature, and install the
cercate to the device.
Before You Start
Create a self-signed cercate rst. See Create and Install Self-signed Cercate for instrucons.
Steps
1. Go to Conguraon → System → Security → Cercate Management .
2. Select a self-signed
cercate from the Server/Client Cercate list.
3. Click Create Cercate Request.
4. Input request informaon.
5. Click OK.
The cercate request details are displayed in a pop-up window.
6. Copy the request content and save it as a request
le.
7. Send the le to a trusted-third party for signature.
8.
Aer receiving the cercated sent back from the third-party, install it to the device.
1) Click Import.
2) Input Cercate ID.
Stched PanoVu Camera with PTZ User Manual
103

HIKVISION PanoVu Series Specifications

General

Brand	HIKVISION
Model	PanoVu Series
Category	Security Camera
Language	English