HIKVISION Safire DS-KH8520-WTE1 User Manual

Figure 2-23 Local Network Configu atio
2.
En
ter the local IP address, subnet mask, gateway address, and port No.
3.
Click Save to enable the setting
Note
•
The de
fault port No. is 8000.
•
Afte
editin the local network parameters of device, you should add the
devices to the device list again.
Linked Devices Network Configu atio
In the linked devices network configu atio page, you can
configu e the network
parameters of master stations SIP servers and management centers of the same
LAN. The devices can be linked to the door statio and realize the linkage between
these devices.
Steps
1.
Click Linked Network Configu atio to enter linked network configu atio page.
Network Indoor Statio Configu atio Guide
35

HIKVISION Safire DS-KH8520-WTE1 Specifications

General

Brand	HIKVISION
Model	Safire DS-KH8520-WTE1
Category	Intercom System
Language	English