Figure 2-24 Linked Network Configu atio
2.
En
ter the master statio IP address, (main) door statio IP address, SIP server IP
addr
ess, management center IP address, and doorphone IP address.
3.
Select the main door statio type from the drop-down list.
4.
Click Sa
ve to enable the setting
Note
•
Afte adding master
statio IP Address, the linkage between indoor statio
and master statio can be realized.
•
Afte adding the door statio IP Address, the video intercom between indoor
station of same building can be realized.
•
Afte adding SIP Server Address IP, the video intercom of same community:
video in
tercom between indoor station of di erent building, calling indoor
statio from outer door statio and video intercom between management
center and indoors.
•
Afte adding management center IP Address, the events can be uploaded to
the manag
ement center.
•
For indoor extension, only parameter about the main indoor statio should
be configu ed.
DNS
Settin
The indoor statio supports 2 DNS address.
Network Indoor Statio Configu atio Guide
36
To Next Page
Loading...
Need help?
General
