What to do if the drill bit cannot be released from my Hilti TE 2-M?
If you are unable to release the drill bit from your Hilti Rotary Hammer, ensure that the chuck is pulled back as far as it will go. Then, try removing the accessory tool.
Why doesn’t my Hilti TE 2-M achieve full power?
If your Hilti Rotary Hammer doesn’t achieve full power, the gauge (cross section) of the extension cord conductors might be inadequate. Use an extension cord with an adequate conductor cross section.
General| Impact energy (max) | 1.8 J |
|---|---|
| Sound pressure level | 91 dB |
| Vibration level (hammer drilling) | 13.5 m/s² |
| Drilling diameter in concrete (max) | 12 mm |
| Reverse | Yes |
| Power source | AC |
Weight and Dimensions| Depth | 360 mm |
|---|---|
| Width | 89 mm |
| Height | 203 mm |
| Weight | 2900 g |
To Next Page
