Hilti TE 50-AVR Operating Instructions

10 Español 2126361
*2126361*
Trouble or fault Possible cause Action to be taken
The drill bit can’t be released. The chuck is not pulled back fully. ▶ Pull the tool lock back as far
as it will go and remove the
accessory tool.
The side handle is not fitted cor-
rectly.
▶ Release the side handle and refit
it correctly so that the clamping
band and side handle engage in
the recess.
The service indicator lights
after changing the carbon
brushes.
The contact surfaces are not yet
run in.
▶ Run in the carbon brushes by
allowing the power tool to run
under no load for at least 1
minute without interruption.
10 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
11 RoHS (Restriction of Hazardous Substances)
Click on the link to go to the table of hazardous substances: qr.hilti.com/r4902202.
There is a link to the RoHS table, in the form of a QR code, at the end of this document.
12 Manufacturer’s warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
Manual de instrucciones original
1 Información sobre el manual de instrucciones
1.1 Acerca de este manual de instrucciones
• Lea detenidamente este manual de instrucciones antes de la puesta en servicio. Ello es imprescindible
para un trabajo seguro y un manejo sin problemas.
• Observe las indicaciones y advertencias de seguridad en este manual de instrucciones y en el producto.
• Conserve este manual de instrucciones siempre junto con el producto y entregue el producto a otras
personas siempre acompañado de este manual de instrucciones.
1.2 Explicación de símbolos
1.2.1 Avisos
Las advertencias de seguridad advierten de peligros derivados del manejo del producto. Se utilizan las
siguientes palabras de peligro:
PELIGRO
PELIGRO !
▶ Término utilizado para un peligro inminente que puede ocasionar lesiones graves o incluso la muerte.
ADVERTENCIA
ADVERTENCIA !
▶ Término utilizado para un posible peligro que puede ocasionar lesiones graves o incluso la muerte.

Hilti TE 50-AVR Specifications

General

Drilling	Yes
Chuck type	SDS Max
Product color	Black, Red
Country of origin	Germany
Impact rate	3180 bpm
Rated speed (max)	360 RPM
Impact energy (max)	6 J
Vibration level (hammer drilling)	9 m/s²
Drilling diameter in concrete (max)	40 mm
Optimum drilling diameter (concrete)	16 - 32 mm
Input power	1100 W
Power source	AC
Power plug type	Type C
Noise level	108 dB
Quantity per shipping (inner) case	1 pc(s)

Weight and Dimensions

Weight	6100 g
Package depth	3456 mm
Package width	2000 mm
Package height	4500 mm
Package weight	4500 g