Hilti TE2 User Manual

11
en
General information
In these operating instructions, this symbol indi-
cates points of particular importance to safety. The
instructions at these points must always be observed
in order to avoid the risk of serious injury.
Caution: high voltage
 The numbers refer to the illustrations. The illustra-
tions can be found on the fold-out cover pages. Keep
these pages open while you read the operating instruc-
tions.
In these operating instructions, the power tool to which
these operating instructions apply is referred to as “the
tool”.
It is essential that the operating
instructions are read before the
tool is operated for the first time.
Always keep these operating
instructions together with the tool.
Ensure that the operating
instructions are with the tool when
it is given to other persons.
Operating controls 
 Chuck release ring (TE 2-M)
 Function selector switch
 Control switch
 Forwards / reverse switch (TE 2 / TE 2-S / TE 2-M)
 Lockbutton
Component parts 
 Dust shield
 Chuck
 Side handle
 Type plate
Description
The TE 2 / TE 2-E / TE 2-S / TE 2-M is an electrically pow-
ered rotary hammer with pneumatic hammering mech-
anism designed for professional use.
The following items are supplied: power tool, (quick-
release chuck TE 2-M), operating instructions, grease
(except TE 2-E), toolbox.
The following conditions must always be observed
when the tool is in use:
– The tool must be connected to an alternating current
electric supply in compliance with the information
given on the type plate.
– The tool is for hand-held use only.
– The tool must not be used in places where the sur-
rounding conditions may present a risk of explosion.
– Changes or modifications to the tool are not per-
missible.
– To avoid the risk of injury, use only the genuine Hilti
accessories and additional equipment specified for
use with this tool.
– Observe the information printed in the operating
instructions concerning operation, care and main-
tenance. The tool and its ancillary equipment may
present hazards when used incorrectly by untrained
personnel or when used not as directed.
TE 2/TE 2-E/TE 2-S/TE 2-M Rotary Hammer
Read the
operating
instructions
before use.
Return waste
material for
recycling
Contents Page
General information 11
Description 11
Technical data 13
Safety rules 14
Before use 15
Operation 16
Drilling 16
Forwards/reverse rotation 17
Insert tools and accessories 17
Care and maintenance 17
Disposal 18
Manufacturer's warranty – tools 18
Troubleshooting 19
Declaration of conformity 19
02_BA_TE2_S_M_P1_en.qxd 31.08.2007 10:39 Uhr Seite 11

Hilti TE2 Specifications

General

Dust Removal Module Available	Yes
Rated Voltage	230 V
Hammer Drilling Diameter Range	5 - 22 mm
Functionality	Hammer drilling, drilling
Tool Holder	SDS-plus

Summary

General Information

Safety Symbols and Controls Overview

Explains safety symbols, tool controls, and main parts of the rotary hammer.

Product Description and Package Contents

General description of the rotary hammer and its package contents.

Tool Features and Applications

Key Technical Features

Highlights the main features such as electrical protection and mechanical clutch.

Application Guidelines

Details the specific uses and materials for different tool models.

Technical Data and Specifications

Performance, Noise, and Vibration Data

Lists technical specs, noise, and vibration levels as per safety standards.

Hearing Protection Advisory

Advises users to wear ear protection due to noise levels.

Safety Rules and Precautions

General Operation and Work Area Safety

Comprehensive safety instructions for operation and work environment.

Electrical and Personal Safety

Precautions for electrical hazards and operator's personal safety.

Proper Tool Use, Care, and Servicing

Instructions on correct usage, maintenance, and professional servicing.

Additional Safety and Setup

Personal Safety and Workplace Environment

Further personal safety tips and workplace safety, including ventilation.

Personal Protective Equipment (PPE)

Specifies the necessary safety gear for users.

Pre-Use Checks and Side Handle Installation

Essential pre-operation checks and guide for fitting the side handle.

Tool Operation Procedures

Operation Modes and Specific Procedures

Covers low temp operation, drill sticking, and drilling methods.

Tool and Chuck Management

Instructions for inserting/removing tools and changing the chuck.

Using the Depth Gauge

How to use the depth gauge for precise hole depths.

Controls, Accessories, and Maintenance

Rotation Control, Accessories, and Dust Extraction

Select rotation, info on accessories, and dust system usage.

Tool Cleaning and Maintenance

Routine cleaning procedures and regular maintenance checks.

Product End-of-Life and Warranty

Responsible Product Disposal

Guidelines for environmentally sound disposal and recycling of the tool.

Manufacturer's Warranty Terms

Details the conditions and duration of the tool's warranty.

Warranty Limitations and Exclusions

Outlines what is not covered by the manufacturer's warranty.

Troubleshooting and Compliance

Common Tool Problems and Solutions

Lists typical issues and provides solutions for troubleshooting.

EC Declaration of Conformity

Statement confirming product compliance with relevant EU directives and standards.