HI 800 023 E Rev. 1.01 (1018)
All HIMA products mentioned in this manual are protected by the HIMA trade-mark. Unless noted
otherwise, this also applies to other manufacturers and their respective products referred to herein.
All of the instructions and technical specifications in this manual have been written with great care and
effective quality assurance measures have been implemented to ensure their validity. For questions,
please contact HIMA directly. HIMA appreciates any suggestion on which information should be
included in the manual.
Equipment subject to change without notice. HIMA also reserves the right to modify the written material
without prior notice.
For further information, refer to the CD-ROM and our website http://www.hima.de and
http://www.hima.com.
© Copyright 2010, HIMA Paul Hildebrandt GmbH + Co KG
All rights reserved
Contact
HIMA Address:
HIMA Paul Hildebrandt GmbH + Co KG
P.O. Box 1261
68777 Brühl, Germany
Tel: +49 6202 709-0
Fax: +49 6202 709-107
E-mail: info@hima.com
Type of Change
Revision
index
Revisions
technical editorial
1.00 The SILworX programming tool is taken into account
The document layout was modified.
X X
1.01
Range of values for watchdog time, description of safety-related
analog inputs, checklist filenames
X
To Next Page
Loading...
Need help?
General
