HIMatrix 1 Safety manual
HI 800 023 E Rev. 1.01 Page 7 of 72
1 Safety manual
This manual contains information on how to operate the HIMatrix safety-related automation
systems in the intended manner.
The following conditions must be met to safely install and start up the HIMatrix automation
systems, and to ensure safety during their operation and maintenance:
Knowledge of regulations.
Proper technical implementation of the safety instructions detailed in this manual
performed by qualified personnel.
HIMA will not be held liable for severe personal injuries, damage to property or the
environment caused by any of the following:
Unqualified personnel working on or with the devices.
De-activation or bypassing of safety functions.
Failure to comply with the instructions detailed in this manual.
HIMA develops, manufactures and tests the HIMatrix automation devices in compliance
with the pertinent safety standards and regulations. The use of the devices is only allowed if
the following conditions are met:
They are only used for the intended applications.
They are only operated under the specified environmental conditions.
They are only operated in connection with the approved external devices.
To provide a clearer exposition, this manual does not specify all details of all versions of the
HIMatrix automation devices. For further details refer to the specific manuals.
1.1 Structure and Use of the Document
This safety manual examines the following topics:
Intended use
Safety concept
Central functions
Inputs
Outputs
Software
Safety-related aspects of the user program
Configuring communication
Use in fire alarm systems
Appendix:
- Increasing the SIL of sensors and actuators
- Glossary
Indexes
This manual distinguishes between the following variants of the HIMatrix system:
Programming tool Processor operating system
Communication operating
system
SILworX Versions beyond 7 Version 12 and beyond
ELOP II Factory Versions prior to 7 Versions prior to 12
Table 1: HIMatrix System Variants
To Next Page
Loading...
Need help?
General
