HIMA HIMax X-HART 32 01 - Coding of X-CB 016 and X-CB 017 Connector Boards; Table 10: Position of Coding Wedges on HART Module Slot

X-HART 32 01 3 Product Description
HI 801 307 E Rev. 5.00 Page 19 of 58
Male Connector Recess
Prepared Male Connector Recess
Coding Wedge
Guideway for Coding Wedge
Figure 5: Coding Example
Coded I/O modules can be plugged in to uncoded connector boards. Uncoded I/O modules
cannot be plugged in to coded connector boards.
3.6.2 Coding of X-CB 016 and X-CB 017 Connector Boards
a7
a13
a20
a26
c7
c13
c20
c26
X
X
X
X
Table 10: Position of Coding Wedges on HART Module Slot
i
Position of the coding wedges on the analog module slots, see the corresponding mod
ule-
specific manual.