HIMA HIMax X-HART 32 01 - System Cable X-CA 011; Cable Plug Coding; Figure 11: System Cable X-CA 011 01 N; Table 20: Cable Data

3 Product Description X-HART 32 01
Page 32 of 58 HI 801 307 E Rev. 5.00
3.7.3 System Cable X-CA 011
The X-CA 011 system cable is used to wire the X-CB 017 03/04 and X-CB 017 53 connector
boards to the field termination assemblies.
General
Cable
LIYCY-TP 18 x 2 x 0.25 mm²
Wire
Finely stranded
Average outer diameter (d)
approx. 12.7 mm
Minimum bending radius
Fixed laying
Flexible application
5 x d
10 x d
Combustion behavior
Flame resistant and self-extinguishing in
accordance with IEC 60332-1-2, -2-2
Length
8…30 m
Color coding Based on DIN 47100, see Table 18 and Table
19.
Table 22: Cable Data
Identical Cable Plugs
Figure 11: System Cable X-CA 011 01 n
The system cable is available in the following standard length:
System cable
Description
Length
X-CA 011 01 8
Coded cable plugs on both sides
8 m
X-CA 011 01 15
15 m
X-CA 011 01 30
30 m
Table 23: Available System Cables
3.7.4 Cable Plug Coding
The cable plugs are equipped with three coding pins. Therefore, cable plugs only match
connector boards and FTAs encoded accordingly, see Figure 9.