HIMA HIMax X-HART 32 01 - System Cable; System Cable X-CA 005; Cable Plug Coding; Figure 10: System Cable X-CA 001 01 N

X-HART 32 01 3 Product Description
HI 801 307 E Rev. 5.00 Page 31 of 58
3.7 System cable
3.7.1 System Cable X-CA 005
The X-CA 005 system cable is used to wire the X-CB 016 03/04 and X-CB 016 53/54 connector
boards to the field termination assemblies.
General
Cable
LIYY-TP 38 x 2 x 0.25 mm²
Wire
Finely stranded
Average outer diameter (d)
approx. 15.2 mm
Minimum bending radius
Fixed laying
Flexible application
5 x d
10 x d
Combustion behavior
Flame resistant and self-extinguishing in
accordance with IEC 60332-1-2, -2-2
Length
8…30 m
Color coding
Based on DIN 47100, see Table 13.
Table 20: Cable Data
Identical Cable Plugs
Figure 10: System Cable X-CA 001 01 n
The system cable is available in the following standard length:
System cable
Description
Length
X-CA 001 01 8
Coded cable plugs on both sides
8 m
X-CA 001 01 15
15 m
X-CA 001 01 30
30 m
Table 21: Available System Cables
3.7.2 Cable Plug Coding
The cable plugs are equipped with three coding pins. Therefore, cable plugs only match
connector boards and FTAs encoded accordingly, see Figure 7.