HIMA HIMax X-HART 32 01 - HART Module with Analog Output Module; Figure 17: Connection of Analog Output Modules to the HART Module

4 Start-up X-HART 32 01
Page 46 of 58 HI 801 307 E Rev. 5.00
4.4.3 HART Module with Analog Output Module
Connector boards X-CB 017 01 (with screw terminals) or X-CB 017 03 (with cable plug) can be
used to perform the wiring such as described in Figure 15.
AO1+
AO1-
Analog Output Module
Connector Board
Actuator (Load)
HART Module
HART Channel
Analog Output
Figure 17: Connection of Analog Output Modules to the HART Module