X-HART 32 01 Appendix
HI 801 307 E Rev. 5.00 Page 55 of 58
Index of Figures
Figure 1: Sample Type Label 11
Figure 2: Block Diagram 12
Figure 3: Indicators 13
Figure 4: Views 16
Figure 5: Coding Example 19
Figure 6: X-CB 016 Connector Boards with Screw Terminals 20
Figure 7: X-CB 016 Connector Boards with Cable Plug 23
Figure 8: Connector Boards with Screw Terminals 25
Figure 9: X-CB 017 Connector Boards with Cable Plug 28
Figure 10: System Cable X-CA 001 01 n 31
Figure 11: System Cable X-CA 011 01 n 32
Figure 12: Example of how to Insert the Mono Connector Board 34
Figure 13: Example of how to Secure the Mono Connector Board with Captive Screws 35
Figure 14: Mounting and Removing a Module 37
Figure 15: Connection of Analog Input Modules to the HART Module 44
Figure 16: Redundant Connection of Analog Input Modules to the HART Module 45
Figure 17: Connection of Analog Output Modules to the HART Module 46
Figure 18: Redundant Connection of Analog Output Modules to the HART Module 47
To Next Page
Loading...
