HIMA HIMax X-HART 32 01 - HART Module with Redundant Analog Input Modulesn; Figure 16: Redundant Connection of Analog Input Modules to the HART Module

X-HART 32 01 4 Start-up
HI 801 307 E Rev. 5.00 Page 45 of 58
4.4.2 HART Module with Redundant Analog Input Modulesn
When redundantly wired as specified in Figure 16, the analog input modules and the HART
module are inserted in the base plate next to each other and on a common connector board.
Connector boards X-CB 016 02 (with screw terminals) or X-CB 016 04 (with cable plug) can be
used.
S+
GND
AI R+
AI+
S+
GND
AI R+
AI+
Transmitter
Connector Board
Supply
Analog Measuring Facility
Analog Input Module
HART Channel
HART Module
Figure 16: Redundant Connection of Analog Input Modules to the HART Module