The monitor is
installed well
Chapter 6 Product specifications
Name Wearable Ambulatory Blood Pressure Monitor
Model WBP-03D
measuring method Oscillometric method
Systolic blood pressure
measurement range
40-260 mmHg
Diastolic blood pressure
measurement range
20-210 mmHg
Pulse rate measurement
range
40-200 bpm
Resolution Blood pressure: 1mmHg or 0.1Kpa; pulse rate: 1BPM
Repeatability
The difference of repeated readings of each point is within
4mmHg in the statically continuous low-pressure mode
Accuracy Static Accuracy: ±3 mmHg; Pulse rate: ±3BPM
Pressure testing American Freescale pressure sensor
Working power supply Built-in Li-ion battery
Data memory Flash memory stores up to 300 readings
Calibration frequency At least one time two years
Security system The rated range of cuff pressure: 0~290mmHg
Sampling period Multiple independent programming cycle
Size About 119×52×21mm
Net weight About 105g，including battery
Work environment T: 5℃-40℃; HR: 10%-95%; gas pressure: 70KPa-106KPa
Condition of storage
Stored under the condition of temperature (-20℃-+55℃), HR
(no more than 95%) and atmospheric pressure
(70KPa-106Kpa), no corrosive gases and well-ventilated.
Data transmitted by USB data wire, Bluetooth connection
Protection against
harmful ingress of water
To Next Page
