Hioki 3169-20 - Connect the Voltage Cords and Clamp Sensors to the Line to be Measured

18
Power Measurement
Quick Start Manual
1. Press the key to display the measurement screen.
2. Press the (SCREEN) key to display the selection win-
dow.
(The following screenshot illustrates the Main Measurement screen being
switched to the Wiring Diagram screen.)
3. Press the key to move the cursor to "WIRING DIA-
GRAM".
4. Press the (select) key to display the wiring diagram
screen.
Connect the Voltage Cords and Clamp
Sensors to the line to be Measured