Hioki 3169-20 - Measurement Setup and Connections; Connection Procedures, Methods, and Ranges

Power Measurement
29
1
2
3
4
5
6
7
8
9
10
11
The 3169 will automatically stop measurement at the stop time. The mea-
surement data has been saved on the PC card.
Stop Measurement
Interrupt Measurement
Press the key. The message "Do you want to stop the time-series
measurement?" is displayed for you to confirm. Press the (yes) key.
If the message “This key cannot be selected.” is shown, press the key
to display the Measurement screen and then press the key again.
All measurement data before the interruptions saved on the PC card if the
measurement is interrupted.