4
Key Names and Functions
Quick Start Manual
This section of the screen shows information common to all measurement
screens (except the zoom screen and the wiring diagram screen).
Common Display
Common Display
Time
Range
Wiring
No. of circuits
Synchronization method
Interval
Time Displays the current time.
Range Displays the voltage range and current range of the on-
screen circuit. The VT(PT) ratio and CT ratio are shown
under these ranges. The current range and CT ratio of I4 are
shown only when 3P4W4I is set as the wiring method.
Wiring Displays the wiring method set on the setting screen.
No. of circuits Displays the number of circuits to be measured as set on the
setting screen.
Synchronization
method
Displays the synchronization method and frequency of the
line to be measured as set on the setting screen.
Interval Displays the interval set on the setting screen.
To Next Page
Loading...
