1. Press the key as many times as necessary to display
the Data Output Setting screen.
2. Set as shown on the screen below.
Instruction manual
"5.3 Setting on the Data Output Setting Screen (DATA OUTPUT)"
If F3 (AUTO) key is
pressed when the
cursor is at the mea-
surement start time,
the start time will be
set to a date and time
close to the current
time.
The time that is set
will vary with the in-
terval time setting.
(For example, if the
current time is 7:58
and the interval time
is 5 min., this param-
eter will be set to
8:00.)
See
AUTO
2
(p.25)
1
(p.25)
If a filename is not specified or a file with the same name
exists on the PC card, the file will automatically be named
"69MEASXX" (XX: 00 to 99).
To Next Page
Loading...
