Hioki 3169-20 - Page 29

Power Measurement
25
1
2
3
4
5
6
7
8
9
10
11
Three methods for starting and stopping measurement
Measurement start
Selection Description
MANUAL Measurement starts when the START/STOP key is pressed.
TIME Measurement starts at the time set by users.
JUST Measurement will begin as soon as the internal clock reaches a
time that is evenly divisible by the set interval.
Measurement stop
Selection Description
MANUAL Measurement stops when the START/STOP key is pressed.
TIME Measurement stops at the time set by users.
TIMER
Measurement stops when the duration set by the users has
elapsed. 1 second to 8784 hours.
1
2
Storable Data According to Interval Setting
Yes: Can be stored No: Cannot be stored
Interval setting
Extension
(format)
Normal
measurement
data
Integrated power/
demand
measurement
data
Harmonic
measurement
data
1/2/5/10/15/30/60 m
CSV
(CSV)
Yes Yes Yes
1/2/5/10/15/30 s
CSV
(CSV)
Yes Yes No
All wave/100/200/500 ms
BIN
(Binary)
Yes
(Instantaneous
values only)
No No
2