26
Power Measurement
Quick Start Manual
3. Press the key to display the save/print items setting
screen.
4. Set as shown on the screen below.
If loading data into a
commercial spread-
sheet application, verify
that this number is 256
or less.
Indicates the amount of
save time available on
the currently inserted PC
card. Verify that the time
shown is not less than
the measurement time.
Instruction manual
"5.4 Setting on the Save/
Print Items Setting Screen
(SAVE, PRINT ITEMS)
"7.4 "Saving Measure-
ment Data"
See
Reference
• If the storable time is shorter than the measurement time,
delete unnecessary files from the PC card or set interval time
longer.
• For details on settings for harmonics measurement-data out-
put, see 5.4.4 "Setting Harmonic Measurement-data Output
Items" of the instr
uction manual.
To Next Page
Loading...
