30
Power Measurement
Quick Start Manual
Shutdown Procedure
1. Disconnect the voltage cords and clamp-on sensor from
the measured line.
2. Turn off the power to the 3169.
3. Disconnect the power cord from the AC outlet.
4. Remove the PC card from the 3169.
5. Copy the data on the PC card to the PC.
6. Analyze the saved data on PC.
You can analyze data on a PC with the optional SF1001 Power Logger
Viewer. Additionally, data is saved to a CSV format file (p.25) when the inter-
val setting is 1 sec. or greater, allowing that data to be loaded into a commer-
cial spreadsheet application such as Excel*.
• Using the SF1001 Power Logger Viewer (option)
This software allows you to easily generate graphs on a PC using data
recor
ded with the instrument. In addition to time-series graphs, ledger-style
data, and daily, weekly, and monthly displays, it can also generate lists,
graphs, and waveforms for harmonic measurement data.
* Microsoft and Excel are either registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
To Next Page
Loading...
