Hioki 3169-20 - Page 36

32
Power Measurement
Quick Start Manual
*: If the regeneration power has only occurred during the interval, P_DEM = 0 and PF_DEM = 1.
Integrated
power
Total integrated power from the start of time-series measurement
WP+_INTEG[Wh]_1 to WP+_INTEG[Wh]_4
Integrated active power (consumption),
Circuit 1-4
Wh
WP-_INTEG[Wh]_1 to WP-_INTEG[Wh]_4
Integrated active power (regeneration),
Circuit 1-4
Wh
WQ+_INTEG[varh]_1 to WQ+_INTEG[varh]_4 Integrated reactive power (lag), Circuit 1-4 varh
WQ-_INTEG[varh]_1 to WQ-_INTEG[varh]_4 Integrated reactive power (lead), Circuit 1-4 varh
Demand Integrated power within interval
WP+_INTVL[Wh]_1 to WP+_INTVL[Wh]_4
Integrated active power (consumption),
Circuit 1-4
Wh
WP-_INTVL[Wh]_1 to WP-_INTVL[Wh]_4
Integrated active power (regeneration),
Circuit 1-4
Wh
WQ+_INTVL[varh]_1 to
WQ+_I
NTVL[varh]_4
Integrated reactive power (lag),
Circuit 1-4
varh
WQ-_INTVL[varh]_1 to WQ-_INTVL[varh]_4
Integrated reactive power (lead),
Circuit 1-4
varh
Average value within interval (demand value)
P_DEM[W]_1 to P_DEM[W]_4
Average value within time
Active power (Consumption), Circuit 1-4
W
Q_DEM[var]_1 to Q_DEM[var]_4
Average value within time
Reactive power (LAG), Circuit 1-4
var
PF_DEM_1 to PF_DEM_4
Average value within time, Power factor,
Cir
cuit 1-4
Maximum demand value during time-series measurement
P_DEM_MAX[W]_1 to P_DEM_MAX[W]_4
Maximum demand value, Active power,
Cir
cuit 1-4
W
P_DEM_MAX DATE_1 to P_DEM_MAX
DA
TE_4
Date of occurrence of maximum demand
yyyy/m/d, Circuit 1-4
P_DEM_MAX TIME_1 to P_DEM_MAX
TI
ME_4
Time of occurrence of maximum demand
h:mm:ss, Circuit 1-4
Classification Data Header Contents Unit
P_DEM
P_DEM
2
+Q_DEM
2
*
Reference
• "INST" in the header will be replaced by "AVE" for the average-
value data.
• "INST" in the header will be replaced by "MAX" for the maxi-
mum-value data.
• "INST" in the header will be replaced by "MIN" for the mini-
mum-value data.