Hioki 3256-50 - Page 17

13
1.3 Parts Names and Functions
Frequency
18
Voltage
detecting
31
V
REC • MEMO
RANGE
( 1 - 4 )
"Hz" lights up
Measur
e-
ment
V
Bring test leads
c
lose to the powe
r
line.
REC • MEMO × 2
"1" lights up
RANGE
( 1 - 4 )
Hold the measured value. (HOLD AUTO function)
This function is used when the displayed value cannot be checked during
measurement (such as when necessary to measure the conductor in a
dark place or using both hands.
25
Hold the measured value. (HOLD function)
26
"O.F" is displayed to provide a warning
(Overflow Warning function)
When the measured value exceeds the maxi-
mum value, "O.F" is displayed.
27
Use this function to check any discrepancy from the reference,
or to control the resistance for the purpose of zero adjustment
(Relative function)
Cancellation: H.AUTO / REL (press again)
28
Quick Reference (application)
: Turn on the power while pressing
the button (hold the button down
until a beeping sound is generated
).
:Button
REC•MEMO
REC•MEMO
<1 second:
Press the button for at least 1 second.
Example
V/ V/Ω/
4
0μA/μA/mA/
10A
H.AUTO/REL
"HOLD"
Blinking
(Intermittent
sound)
Move the test leads away from
the measurement object.
V/ V/Hz/
Ω
/
//40μA/
μ
A/mA/10A
H.AUTO/REL
H.AUTO/RE
L
Measure-
ment
V/ V/40μA
/
μ
A/mA/10A
V/ V/Ω/
4
0μA/μA/mA/
1
0A
H.AUTO/REL
D
isplay the
r
eference.
(<1 second)
("REL"
lights up)