1.3 Parts Names and Functions
Measurement
Procedures
Chapter 2
Observe the following precautions to avoid
electric shock.
• Always verify the appropriate setting of the
function selector before connecting the
test leads.
• Disconnect the test leads from the mea-
surement object before switching the func-
tion selector.
• When it is necessary to replace the mea-
surement terminal, remove the test lead
from the measurement object and discon-
nect the lead from the terminal before tog-
gling the function selector.
Even when the shutter is closed, the termi-
nals are not sufficiently separated. To avoid
electrocution, do not touch the terminals.
When the shutter is damaged, discontinue mea-
surement and repair it.
To Next Page
Loading...
