2.4 Resistance Measurement
2.4 Resistance Measurement
• Never apply voltage to test leads when
the Resistance function is selected.
Doing so may damage the product and
result in personal injury.
• To avoid electrical accidents, remove
power from the circuit before measuring.
1. Move the function selector to th
Ω position.
2. Connect the red test lead to te
minal V.Ω, and the black test lea
to terminal COM.
3. Connect the test leads to th
measurement object, and rea
the indicated value.
Black
Red
Black
Red
Selecting the manual range:
Reselecting the auto range:
RANGE (AUTO is turned off)
RANGE
(Press for at least 1 sec-
ond) ("AUTO" lights up)
Holding the measured
value:
HOLD AUTO Function,
page 25) or
HOLD Function, page 26)
H.AUTO/REL
→Measurement
→Intermittent sound→
Move the test leads away from the
measurement object.
H.AUTO/REL
+Power-on→ Mea-
surement →H.AUTO/REL
To Next Page
Loading...
