Hioki 3256-50 - Continuity Check

23
2.5 Continuity Check
2.5 Continuity Check
• Never apply voltage to test leads when
the Continuity function is selected. Doing
so may damage the product and result in
personal injury.
• To avoid electrical accidents, remove
power from the circuit before measuring.
1. Move the function selector to th
e
position.
2. Select Diode ( ) using th
e
REC•MEMO button ( lights up
).
3. Connect the red test lead to te
r-
minal V.Ω, and the black test lea
d
to terminal COM.
4. Connect the test leads to th
e
measurement object.
When the continuity (threshold:
50±30 Ω or less) is established,
the beeping sounds and the
resistance is displayed
(fixed to the 420-Ω range).
REC•MEMO
Black
Red
Black
Red