Hioki 3256-50 - Chapter 3 Additional Functions; HOLD AUTO Function

25
3.1 HOLD AUTO Function
Additional
Functions
Chapter 3
3.1 HOLD AUTO Function
Functions
V/ V/Ω/40μA/μA/mA/10A
Description
Simply moving the test leads away from the mea-
surement object holds the measured value. This
function is useful when it is difficult to read the
displayed value in the current location or both
hands are being used to conduct the measure-
ment.
Blind zone V/ V: 420 mV range, less than 400 counts (other range
)
A/ A: less than 40 counts
Ω: O.F
1. Select the desired function and connect th
e
the measurement product.
2. Press the H.AUTO/REL button.
("HOLD" blinks) (In the measurement of resistan
ce
played.)
3. Connect the test leads to the measuremen
t o
the measured value is stabilized, an inte
rm
is generated.
("HOLD" lights up)
4. When the intermittent sound is heard,
mo
leads away from the measurement obje
ct.
sured value immediately before the t
est
removed is held.
("HOLD" blinks)
H.AUTO/REL
Measure
Beeping
sound
The measured
value is held.
HOLD
(lights up)
HOLD
(blinks)
HOLD
(blinks)
HOLD AUTO is disabled in the AC/DC 420-mV
range.
Canceling the hold
mode:
Press H.AUTO/REL again.
(HOLD is turned off)
Saving the data: Press
REC•MEMO