Hioki 3256-50 - HOLD Function

3.2 HOLD Function
26
3.2 HOLD Function
Functions
V/ V/Hz/Ω///40μA/μA/mA/10A
Description
This function holds the currently measured
value.
1. Turn on the power while pressin
g
the H.AUTO/REL button, and hol
d
the button down until a beepin
g
sound is generated (toggle th
e
function selector to the desire
d
position).
2. Press the H.AUTO/REL butto
n
again at the measured value to b
e
held. The value is held.
("HOLD" lights up)
3. To cancel the hold mode, press th
e
H.AUTO/REL button again.
H.AUTO/REL
Measure
Displayed
value
H.AUTO/REL
The measured
value is held.
HOLD
lights up
The Hold function is active until the measurement
product is turned off.