x
Attentions During Use
CAUTION
Do not store or use the product where it could be
exposed to direct sunlight, high temperature or
humidity, or condensation. Under such conditions,
the product may be damaged and insulation may
deteriorate so that it no longer meets specifications.
The product is a precision instrument: do not clamp
any foreign objects in the end of the clamp core, or
insert anything in the core gap.
To avoid damage to the product, protect it from
vibration or shock during transport and handling,
and be especially careful to avoid dropping. Do not
exert excessive pressure on the clamp sensor or
attempt to wedge the sensor into a tight spot for
measurement.
Measurements are degraded by dirt on the mating
surfaces of the clamp-on sensor, so keep the
surfaces clean by gently wiping with a soft cloth.
Before using the product the first time, verify that it
operates normally to ensure that the no damage
occurred during storage or shipping. If you find any
damage, contact your dealer or HIOKI
representative.
This product is designed for indoor use, and
operates reliably from 0
to 40 .
This product is not designed to be entirely water- or
dust-proof. To avoid damage, do not use it in a
wet or dusty environment.
Adjustments and repairs should be made only by
technically qualified personnel.
To Next Page
Loading...
