55
Chapter 6 Troubleshooting
Symptom Battery Battery clip Voltage cable
Unit does not come
on.
Yes Yes
indication appears
and unit immediately
turns off.
Yes
indication appears. Yes
Unit turns off during
use.*
Yes Yes
Voltage cannot be
measured.
Yes
Remedy:
If problem persists,
request service.
Replace battery. Check
connection of
battery to clip.
Check voltage
cord for broken
wire.
NOTE
Chapter 6
Troubleshooting
If the unit seems not to be working normally, check
the following points first before requesting service.
* When APS (auto power-off) is effective, the unit is
automatically shut down when no key is pressed for
about 10 minutes. (See 2.11, "Auto Power-Off
Function.")
To Next Page
Loading...
