iii
Safety
DANGER
This equipment is designed according to IEC
61010 Safety Standards, and has been tested for
safety prior to shipment. Incorrect measurement
procedures could result in injury or death, as
well as damage to the equipment. Please read
this manual carefully and be sure that you
understand its contents before using the
equipment. The manufacturer disclaims all
responsibility for any accident or injury except
that resulting due to defect in its product.
Safety
This manual contains information and warnings
essential for safe operation of the product and for
maintaining it in safe operating condition. Before
using the product, be sure to carefully read the
following safety notes.
To Next Page
Loading...
