Hioki IM3523 - IM3533;IM3533-01;IM3590 Connection and Setting Guide

3.5 LAN Settings and Connection (IM3523 needs to be connected to the Z3002)
31
1
Open the SYSTEM screen.
2
Select LAN as the interface.
3
Select the IP address.
4
Select the subnet mask.
Open the SYSTEM screen.
Select.
1
Select LAN.
2
Select.
1
Select the IP address.
2
128.000.000.000 255.128.000.000 255.255.128.000 255.255.255.128
192.000.000.000 255.192.000.000 255.255.192.000 255.255.255.192
224.000.000.000 255.224.000.000 255.255.224.000 255.255.255.224
240.000.000.000 255.240.000.000 255.255.240.000 255.255.255.240
248.000.000.000 255.248.000.000 255.255.248.000 255.255.255.248
252.000.000.000 255.252.000.000 255.255.252.000 255.255.255.252
254.000.000.000 255.254.000.000 255.255.254.000
255.000.000.000 255.255.000.000 255.255.255.000
(Initial setting)
Any of the following 30 subnet masks can be set for the instrument.
Select.
1
Select the subnet mask.
2
HIOKI IM3570A983-08