Hioki IM7580A Series - GP-IB Connection and Settings; (When the Z3000 Is Connected); Connecting the GP-IB Cable; Setting GP-IB

2.4 GP-IB Connection and Settings (when the Z3000 is connected)
15
Chapter 2 Connection and Setting
Connect the GP-IB cable to the GP-IB connector.
2.4 GP-IB Connection and Settings
(when the Z3000 is connected)
Connecting the GP-IB Cable
Setting GP-IB
Recommended cable:
9150-02 GP-IB connection cable (2 m)
You can configure the setting from any of mode and mode.
Procedure
LCR Measurement Screen
1
Interface Settings
w ww . .com
information@itm.com1.800.561.8187