Hioki IM7580A Series - Setting RS-232 C

2.5 RS-232C Connection and Settings (when the Z3001 is connected)
18
Setting RS-232C
Procedure
LCR Measurement Screen
1
Interface Settings
You can configure the setting from any of mode and mode.
Press .
2
RS-232C Settings
3
Press to confirm the setting.
4
RS-232C Settings
Select the handshake setting.
No flow control
Software (XON/XOFF control)
Select the terminator setting.
CR+LF
CR
Select the baud rate setting.
w ww . .com
information@itm.com1.800.561.8187