Hioki IM7580A Series - USB Settings and Connection; Setting USB

2.2 USB Settings and Connection
7
Chapter 2 Connection and Setting
The display will vary with the installed options.
2.2 USB Settings and Connection
Setting USB
To connect the instrument to a computer the first time, a dedicated USB driver must be installed.
Before connecting the instrument to the computer, install the USB driver.
The USB driver can be downloaded from the bundled CD, or our web site.(http://www.hioki.com)
The USB driver is compatible with the Windows Vista (32-bit, 64-bit version), Windows 7 (32-bit,
64-bit version), Windows 8 (32-bit, 64-bit version) and Windows 10 (32-bit, 64-bit version) operating
systems.
Additionally, do not put the computer into the sleep state while the instrument is connected to the
computer.
You can configure the setting from any of mode and mode.
Procedure
LCR Measurement Screen
1
Interface Settings
Press .
2
USB Setting
w ww . .com
information@itm.com1.800.561.8187