Installation GRS103
Release
01
03/2022
19
Mechanical stress: Check for potential dangers resulting from unevenly
distributed weight when you install the device in a switch cabinet.
Electric circuit overloading: Observe the effects of electric circuit
overloads on the overload current protection and the power supply cables
when you connect devices to the power supply. Refer to the device
parameters specified on the type plate of the device.
Safe grounding: Make sure that devices installed in switch cabinets are
grounded safely. When you install a device in a switch cabinet, also watch
out for power supply connections other than the direct connections to the
circuit branch (for example socket boards).
To Next Page
Loading...
Need help?
General
