Installation GRS103
Release
01
03/2022
53
Prerequisites for the support of PoE:
At least 1 media module with PoE functionality (M1-8TP-RJ45 PoE) is
mounted in the basic device.
The 10/100 Mbit/s PoE port allows you to connect network components as a
PoE voltage sink according to the standard IEEE 802.3 10BASE-T/
100BASE-TX and IEEE 802.3af/IEEE 802.3at.
The PoE power is supplied via the wire pairs transmitting the signal (phantom
supply).
For more details see chapter “General technical data” on page 62.
6.12 Filling out the inscription label
The information field for the MAC address on the front of the device helps you
to identify your device.
To Next Page
Loading...
