To Next PageTo Next PageWhat to do if Hirschmann Music Mixer displays 'Radius range exceeded or lowered below angle range'?
If the Hirschmann Music Mixer displays 'Radius range exceeded or lowered below angle range', it means that the maximum radius as specified in the load chart has been exceeded or you have lowered below the minimum angle due to lowering the boom too far. Raise the boom to a radius or angle specified in the load chart.
What to do if Hirschmann Music Mixer shows 'Error in the logical program flow'?
If the Hirschmann Music Mixer displays 'Error in the logical program flow', it could be because the system program file is defective or the Flash-EPROM is defective. Try uploading valid system software or replacing the central unit.
What to do if Hirschmann iSCOUT expert compact Music Mixer displays 'Wrong rigging condition'?
If the Hirschmann Music Mixer displays 'Wrong rigging condition', it means the selected rigging condition is not contained in the crane data file. Try selecting another rigging condition or check the programming in the crane data file.
Why does Hirschmann iSCOUT expert compact Music Mixer show 'System program and load chart file do not match'?
The 'System program and load chart file do not match' error on your Hirschmann Music Mixer indicates that the system program in the LMI and the programming in the load chart file do not match. To resolve this, upload a valid system program file or the valid load chart file.
Why does Hirschmann iSCOUT expert compact Music Mixer show 'System program and crane data file do not match'?
The 'System program and crane data file do not match' error on your Hirschmann Music Mixer means that the system program in the LMI does not match the programming in the crane data file. To fix this, upload a valid system program file or the valid crane data file.
What to do if Hirschmann iSCOUT expert compact Music Mixer indicates 'Main boom length not available'?
If the Hirschmann Music Mixer indicates 'Main boom length not available', it could be because a non-existing main boom length has been selected. You should set the correct main boom length for the operating state in question. You may also need to check the Data software in the Flash-EPROM.
What to do if Hirschmann iSCOUT expert compact displays 'Operating mode not acknowledged or non permitted slewing zone'?
If the Hirschmann Music Mixer shows 'Operating mode not acknowledged or non permitted slewing zone', it could be due to a non-existing operating mode being selected. Set the correct operating mode for the operating state in question. Alternatively, the boom might be in a non-permitted slewing zone, so slew the boom to a permitted area. You may also need to check the Data software in the Flash-EPROM.
General| Brand | Hirschmann |
|---|---|
| Model | iSCOUT expert compact |
| Category | Music Mixer |
| Language | English |
Details the step-by-step process of the LMI system's operation.
Describes the functions and location of the LMI operator console.
Identifies and explains the various displays and buttons on the console.
Explains the meaning of different status symbols shown on the display.
Guides the operator through setting up the crane's operating mode.
Explains how to quickly change hoist settings during operation.
Describes how to program limits for the crane's operating range.
Details how to set minimum and maximum boom radius limits.
Explains how to set minimum and maximum tip height limits.
Details how to set minimum and maximum boom angle limits.
Covers setting slewing angle limits and virtual wall definitions.
Explains how to define virtual walls to limit the working area.
Describes the final operational checks and verification after setup.
Explains how to access system information and service menus.
Explains how error codes are displayed and their general meaning.
Lists specific fault codes, causes, and elimination steps for the LMI system.
Explains how shut-off values are determined for boom cranes.
Discusses electromagnetic compatibility and preventive measures.
Provides safety guidelines for repairing display and control consoles.
Details installation requirements for specific console types.
