Hirschmann MACH 4002 Family - Page 32

32
MACH 4002
Release 1.0 10/05
U V.24 interface (external management)
A serial interface is provided on the RJ11 socket (V.24 interface) for the
local connection of an external management station (VT100 terminal or
PC with appropriate terminal emulation). This makes it possible to esta
-
blish a connection to the Command Line Interface CLI and to the system
monitor.
The socket housing is electrically connected to the front cover of the
device.
The V.24 interface is electrically connected to the supply voltage.
Fig. 8: Pin assignment of the V.24 interface
Note: In chapter “Technical data” on page 34ff you will find the order num-
ber for the terminal access cable which is to be ordered separately.
You will find a detailed description of the configuration in the “Basic
Configuration User Manual” on the CD-ROM.
VT 100 terminal settings
Speed 9.600 baud
Data 8 bit
Stopbit 1 bit
Handshake off
Parity none
Pin 1
Pin 1
Pin 8
Pin 5
Pin 6
RJ11 DB9
2
3
5
1
2
3
4
5
6
CTS
n.c.
TX
GND
RX
RTS