Hirschmann MACH 4002 Family - 2.4 Disassembling the Device

MACH 4002
Release 1.0 10/05
33
2.4 Disassembling the device
2.4.1 Disassembling the media modules
V Please notice the “ESD guidelines” on page 8 “ and the “Safety instruc-
tions” on page 5ff.
V Lever the selected media module from the slot by pulling the blue
insertion catches (see Fig., steps 1 and 2).
V Pull the media module out of the slot (see Fig., step 3).
V Close the slot with a covering panel.
V Screw the four knurled screws in the covering panel flush with the frame
of the chassis.
2.4.2 Disassembling the SFP modules
V Pull the SFP module on the opened lock out off the socket.
V Close the SFP module with the protective cap.
Step 1
Step 2
Step 3