Hisense N3000 - System Menu Operations; Location, Time, and Timer Settings; Language, Lock, and Parental Guidance; HDMI CEC and Device Control

12
Basic Features
Using the System Menu
Location: Choose the location from where you will watch your TV.
Time: Set the current time based on your location.
• Mode: Set time manually or select automatic.
• Time Zone: Select your time zone.
• Daylight Savings: Select Auto Sync, On or Off to apply Daylight Savings
Time to the TV.
• Date: Set the Date.
• Time: Set the Time.
Timer Setting: Set the timer.
• Power On Mode: Enable the Power On Timer to OFF, Once, Everyday,
Mon~Fri or Sat~Sun.
• Time
：
Set the Power On Time.
• Power Off: Enable the Sleep Timer to OFF, Once, Everyday, Mon~Fri or Sat~Sun.
• Time
：
Set the Power Off Time.
• Sleep Timer: Set the sleep timer to automatically turn the TV Off within a specified time: Off, 10 Min, 20
Min, 30 Min, 40 Min, 50 Min, 60 Min, 90 Min and 120 Min.
• OSD Timer: Set the amount of time that you’d like for the menu to display: Never, 10s, 20s, 30s, or 60s.
Language: Adjust the default language settings for the TV.
Lock: Turn on Lock to block children from being able to view certain programs. The default password is
“0000”.
• System Lock: Enable or disables all locks. All selected locks can be turned off for parental viewing and
easily turned on again.
• Set Password: Change your password that you use to access Lock. If you want to change your lock
password, first enter the new password then enter the same password again.
NOTE
• If you forget the password, call the Consumer Electronics Care Center.
• Channel Lock: Block programs by channels when you turn on the Lock feature.
• Parental Guidance: This function allows you to set up blocking schemes to block specific channels and
ratings. You can set the lock channels watched by young people of different ages from 4~18. It operates
according to information from the broadcasting station, therefore if the signal has incorrect information,
this function will not operate.
Application: Set settings for apps on your TV.
• Netflix: Remove this TV from your Netflix account. Please contact Netflix if you want to stop being billed
for you service.
• ESN: Display the Netflix Electronic Serial Number.
• Version: Display the version.
HDMI CEC: Configure how to control CEC-enabled devices with your TV remote.
• CEC Control: Allow TV to find and control CEC devices connected to your TV.
• Device Auto Power Off: Automatically turn off HDMI CEC devices when the TV is turned off.
• TV Auto Power On: Allow the TV to turn On with CEC-enabled devices.
Location
Time
Timer Setting
Language
Lock
Application
HDMI CEC
Advanced Settings
System